循环电载下热效应对铁电材料畴变的影响

铁电材料在力、电载荷作用尤其是循环载荷作用下有明显的热效应.热效应会在铁电材料中引起应力场和电场.另外,在外载作用下铁电材料发生约束畴变时也会产生附加的应力场,这些附加的应力场和电场都会对铁电材料的畴变产生影响.而且在循环载荷作用的情况下,这种影响会逐渐累积.但在以往的研究中,很少涉及这种影响.该文就循环电载下热效应引起的力、电场和约束畴变时产生的附加应力场对铁电材料畴变的影响进行了初步研究.     

双轴应力状态下正交异性动态光弹性应力——光性定律研究

基于静态下Ｈｙｅｒ和Ｌｉｕ表述的正交异性应力－光性定律，在前文中，提出了正交异性光弹性复合材料的动态应力－光性定律并证明了其在单轴应力状态下的正确性。本文旨在进一步考察在双轴应力状态下正交异性动态应力－光性定律的适用性，采用的方法是对纤维增强光弹性复合材料制作的平板模型施加冲击荷载，加载方向与材料纤维方向分别成０°、９０°及４５°角，同时进行正交异性动态光弹性实验和动态应变测量，另外，对该模型进行相应的各向异性介质时域边界元计算。把动态应变测量推算出的应力分量以及时域边界元计算出的应力分量分别代入正交异性动态应力－光性定律，得到随时间变化的双折射条纹级数历程，将其与正交异性动态光弹性实验的结果进行比较。实验及计算结果表明，在三个加载方向下，由这三种方法得到的双折射条纹级数历程均吻合良好，从而证明了前文提出的正交异性动态应力－光性定律在双轴应力状态下的正确性。     

An optical method to assess electromechanical coupling in ferroelectric ceramics

A new technique is described, which allows the assessment of elastic and inelastic regions around a macroscopic defect in ferroelectric-ferroelastic ceramics. The accuracy and robustness of the method are demonstrated on a PZT plate with a centered hole subjected to uni-axial compressive stresses. From the electrical potential distribution on the sample surface, the mechanical response of the material is obtained at different load levels.     

Second-order hydroelastic analysis of a floating plate in multidirectional irregular waves

Based on an analysis of second-order hydrodynamic forces induced by coupling of first-order wave potentials, second-order hydroelastic equations are established and solved in the frequency domain. The responses of a very large floating structure in multidirectional irregular waves are studied. The characteristics of the difference and sum frequency coordinates are discussed in detail; peaks can be found at the difference and sum frequencies close to the wet resonant frequencies of each mode. We present and analyze the maximum vertical displacement of different points as well as the time history of the vertical displacements of selected points. The differences of the combined (the summation of the linear and non-linear responses) and linear displacements of the selected points are calculated. Our results demonstrate that non-linear fluid forces influence the total responses of the referenced floating structure.     

Rivality index neighbourhood algorithm with density and distances weighted schemes for the building of robust QSAR classification models with high reliable applicability domain

The rivality index (RI) is a normalized distance measurement between a molecule and their first nearest neighbours providing a robust prediction of the activity of a molecule based on the known activity of their nearest neighbours. Negative values of the RI describe molecules that would be correctly classified by a statistic algorithm and, vice versa, positive values of this index describe those molecules detected as outliers by the classification algorithms. In this paper, we have described a classification algorithm based on the RI and we have proposed four weighted schemes (kernels) for its calculation based on the measuring of different characteristics of the neighbourhood of molecules for each molecule of the dataset at established values of the threshold of neighbours. The results obtained have demonstrated that the proposed classification algorithm, based on the RI, generates more reliable and robust classification models than many of the more used and well-known machine learning algorithms. These results have been validated and corroborated by using 20 balanced and unbalanced benchmark datasets of different sizes and modelability. The classification models generated provide valuable information about the molecules of the dataset, the applicability domain of the models and the reliability of the predictions.     

频域反射法光纤延时精密测量

本文提出了一种应用于光纤延时系统中实现光纤延时精密测量的新方法,用以提高光纤延时测量的精度和准确性.该方法以1064 nm激光调制信号作为光源,通过测量回波信号的幅值和相位信息得到被测通道的频率响应,采用快速傅里叶逆变换得到被测目标的延时信息,实现光纤延时测量.本文通过理论分析和延时测量实验对频域反射法与传统的时域测量方法进行对比,使用频域反射法在调制频率范围10—200 MHz,采样频率间隔0.5 MHz的实验条件下,实现了3.3 ps延时测量分辨率,并证明了该方法具有比时域方法更高的测量精度,测量结果的准确性更好.     

Au@碳球复合结构中Au颗粒位置调控光吸收

采用时域有限差分（FDTD）法研究Au纳米颗粒@碳球（AuNPs@CS）复合结构的光吸收控制。发现Au纳米颗粒@碳球复合结构中Au颗粒的位置可以控制复合结构光吸收。模型计算中选取两粒Au纳米颗粒以最佳深度（0 nm）嵌入碳球表面。当两粒Au颗粒球心与碳球球心夹角为22.5°和45°时,复合结构光吸收较单一碳球光吸收明显增强;当夹角为315°、270°、180°、90°时,光吸收增量逐渐减小;当夹角为337.5°时,光吸收量低于单一碳球。这一结果主要归因于Au纳米颗粒位置变化可引起表面等离子体光强度和光散射方向的变化。改变碳球表面Au纳米颗粒的数量和位置,可以进一步调节AuNPs@CS复合结构的光吸收。     

二维抛物型问题的Strang型交替分段区域分裂格式

给出求解二维抛物型方程的Strang型的交替分段区域分裂格式。交替分段思想可以将区域分为一些不重叠的子区域，Strang型算子分裂技巧通过将高维问题的求解分解为几个低维问题的求解来降低其求解的复杂度。方法是无条件稳定的，理论分析了截断误差。数值算例说明格式的有效性及时空的二阶精度.